Answers to pro painters’ most pressing questions by Rick Watson.
When touching up a wall painted with latex semi-gloss, how do I avoid shiners, halos and outlines without repainting the entire wall?
Repair the defects first. When spot priming on some surfaces, a non-uniform appearance of the final coat may result, due to differences in holdout between primed and unprimed areas.
For painting, take some of the original paint and reduce it about 25 percent. Then apply the paint to the center on the patched area, using the original application method, and work it away from the patch.
By feathering the touch-up out from the patch, the difference in film build and appearance should be minimized because you will be blending it into the surrounding areas. If the repaired areas are still noticeable, you may have to repaint the entire wall.
3 more application tips
- Make sure product is completely agitated (mechanically or manually) before use.
- Using the same method of application and batch to touch up with as that originally used will help improve touch up.
- When original application was by spray, preconditioning of touch up paint by running it through the spray tip will help touch up appearance.
This article was originally published in the Fall 2019 issue of PPC magazine. Rick Watson, Product Information, Sherwin-Williams, answers contractor questions in the Ask Your ProPartner™ column of PPC magazine. Read more of his answers to pro painters’ most pressing questions.
Got a question not answered here? Stop by your local Sherwin-Williams store or contact your sales rep. Their employees are trained to have the product knowledge and application expertise to solve your toughest coating problems. Find a store near you.
If you don’t need an immediate answer to your question, you can also email your question to us at firstname.lastname@example.org. Questions submitted to PPC may be published in a future print and/or digital edition of the magazine.