Answers to contractor questions by Rick Watson
Why do paints bubble sometimes? Is there a test that can be done? Any other tell-tale signs to look for before painting? –Nate, Essa Painting
Nate, there are a number of reasons for paint to bubble:
- Surface contaminants: Paint will appear to stick all around the contaminated area but will not adhere to it. As the paint dries, it shrinks. As it shrinks, it can pull, causing bubble-up on the area that’s not adhering very well.
- Overapplying/overworking: Incorporating air into a coating that dries quickly is never good. The coating dries on the surface and the air gets trapped and can’t get out. Overapplying a coating can also cause severe stippling, dry time issues, and even cracking of the paint film.
- Solvent (or water) entrapment: In this case, the coating dries on the surface and the solvent gets trapped under the dried film. As the solvent tries to work its way out, it leaves bubbles and even small craters.
- Improperly shaking a product: Some coatings, such as clear varnishes, polyurethanes and clear sealers, are not designed to be shaken. Shaking incorporates air into the product, so a bubble forms upon application. A stir stick is generally all that is needed to mix these coatings.
- Improper adhesion: This can be the cause if the existing coating looks like it’s adhering as you apply it, but bubbles start to appear once it dries. That means the existing coating really wasn’t adhering to the substrate at all.
Got a question for Rick?
Send it to firstname.lastname@example.org